710 Portable Splicing Stand & Wire Twisting Pliers

AT&T Approved, PID #: 100-007-493

Sunshine Property Management and Improvement, Inc. has developed a stand for the 710 Splicing Tool to be used as an alternative method of mounting the 710 Cutter-Presser. The current seat box mount limits the position of the splicing technicians. This can cause discomfort by the constant bent over position. The stand sets on any flat surface, can be moved into most any position, and allows for up and down adjustment of the 710. It is constructed of solid, lightweight aluminum, easily stored, and requires minimal maintenance. Base is 11” x 11” with working height of 15” to 19”.

710 Splicing Stand In Use

These Wire Twisting Pliers make quick work of twisting paired wire. Turn ordinary Telco wire into Cat 5 wire with an easy pull of the plunger. The pliers spin, twisting the wire with each pull, until you have reached the desired twist per inch needed to reduce cross-talk and/or improve signal transmissions. Technicians find them very helpful for rapid and consistent twisting of the customer’s wire. It also reduces the risk of high opens during the twisting process.

How to use:

Simply clamp down, lock and pull the plunger. The pliers spin, twisting the wire with each pull, until you have reached the desired twist per inch needed.

Wire Twisting Pliers